Omron V680S Series User Manual

Section 2 Functions
Setting Functions
You can use a setting command or a Web browser to set the operating conditions of the Reader/Writer
according to the application environment.
You can save the settings so that they are stored in internal memory in the Reader/Writer even after
the power supply is turned OFF.
Only the settings that are made with the SET TAG COMMUNICATIONS CONDITIONS command are
effective immediately after they are changed. For any changes to all other settings, you must first save
them and then reset the Reader/Writer to enable using them.
Refer to SET MULTI-READER/WRITER OPERATION in V680S Commands in Section 5 Host Communications Specifications
for details on the setting command.
p.127
Refer to RF Tag Communications View in Network Settings View in Section 6 Browser Interface for the setting procedure for the
web browser interface.
p.149, p.152
 Initialization
Initialization returns all of the set values in the Reader/Writer to their default values.

Omron V680S Series Specifications

General

Brand	Omron
Model	V680S Series
Category	Rfid Systems
Language	English