Omron V680S Series - Page 91

Section 3 Installation
 V680-D8KF68A
Mount the RF Tag with M4 screws.
Tighten the screws to a torque of 0.7 to 1.2 N·m.
Refer to RF Tag Installation Precautions in Section 8 Appendices for information on the effect of metal at the back surface,
Mutual Interference of RF Tags and Influence of Inclination of the V680-D8KF68A.
p.237
44
76
Two, M4 holes
M4 screw
Spring washer
Flat washer
Marked side
(Unit: mm)