Omron YRC - 5] Alarm Related to the Syntax of the Robot Language (Compile; 5] Alarm Related to the Syntax of the Robot Language (Compile)

A
Troubleshooting
A-16
4.209 : Point name doesn't exist
Code : &H0004 &H00D1
Meaning/Cause
The specified point name does not exist.
Action
•
Input a point name that can be used.
• Register a new point name.
4.210 : Illegal point name
Code : &H0004 &H00D2
Meaning/Cause
The specified point name is incorrect.
Action
•
Input a point name that can be used.
• Save a new point name.
4.211 : Illegal I/O port
Code : &H0004 &H00D3
Meaning/Cause
The specified port number is incorrect.
Action
Input a correct port number.
4.212 : Data not enough
Code : &H0004 &H00D4
Meaning/Cause
The specified data does not exist.
Action
•
Input a point name that can be used.
• Create and save new data.
4.213 : Undefined controller number
Code : &H0004 &H00D5
Meaning/Cause
The specified controller number does not exist.
Action
Input a correct controller number
.
4.214 : Undefined motor number
Code : &H0004 &H00D6
Meaning/Cause
The specified motor number does not exist.
Action
Input a correct motor number
.
[ 5] Alarm related to the syntax of the robot language (compile)
5.201 : Syntax error
Code : &H0005 &H00C9
Meaning/Cause
The syntax error was found in program.
Action
Input a correct syntax.
5.202 : Data error
Code : &H0005 &H00CA
Meaning/Cause
The input data format is incorrect.
Action
Use a correct data format.