Omron YRC - Alarm Related to the YC-Link;E

A
Troubleshooting
A-55
17.993 : System error 2
Code : &H0011 &H03E1
Meaning/Cause
Error occurred in software for driver unit.
Action
Contact your distributor.
17.994 : System error 3
Code : &H0011 &H03E2
Meaning/Cause
Error occurred in software for driver unit.
Action
Contact your distributor.
17.995 : System error 4
Code : &H0011 &H03E3
Meaning/Cause
Error occurred in software for driver unit.
Action
Contact your distributor.
17.996 : Mode error 1
Code : &H0011 &H03E4
Meaning/Cause
Error occurred in software for driver unit.
Action
Contact your distributor.
17.997 : Mode error 2
Code : &H0011 &H03E5
Meaning/Cause
Error occurred in software for driver unit.
Action
Contact your distributor.
17.999 : Undefined
Code : &H0011 &H03E7
Meaning/Cause
Undefined system error.
Action
Contact your distributor.
[19] Alarm related to the YC-Link/E
19.400: YC/E slave connecting retry
Code : &H0013 &H0190
Meaning/Cause
The YC-Link/E slave is retrying the connection establishment with the master.
Action
Please wait while retrying the connection.
19.500: YC/E master port open fail
Code : &H0013 &H01F4
Meaning/Cause
The communication port of the YC-Link/E master board does not open within a certain period of
time (about 20 seconds).
Action
• Check that the master and slave are connected with the cables.
• Check the slave power is turned on.