Onicon F-4300 - Page 24

F
-
4300 CLAMP
-
ON ULTRASONIC FLOW METER
ONICON Incorporated 727.447.6140 Page 24 onicon.com
2 or 4 Cross Separation Distance
Transducer
1 Cross Separation Distance
Separation Distance
Transducer
Separation Distance
Transducer
Transducer
8. 
brackets while transducers are installed inside them, then re-tightening the screws when done.
Transducer Installation Procedure:
1. Apply a generous amount of acoustic coupling compound dielectric grease inside the rubber boot.
2. 
3. Repeat procedure for the second transducer.
3.3.3.2 Two (2) or Four (4) Cross Mounting Installation for 20 Series Transducers (Continued)