F
-
4300 CLAMP
-
ON ULTRASONIC FLOW METER
ONICON Incorporated 727.447.6140 Page 54 onicon.com
4.5 PROGRAMMING MENU PAGES (Continued)
--Simulation--------
Test Actual
Flow 250USG/m
4-20mA Flow 5.60mA
Relays 1 2 3 4 5 6
Simulation Menu Page
actual measurement in the system, in order to test output signals.
actually measured by the meter.
Test –
Alternatively, you can move the cursor to the Flow option, press to enter the
Conguration Menu Page
information for the F-4300. All of the values in this menu are read-only.
Serial # -
the enclosure, and inside the door.
Utility – Revision of the utility card. The utility card is the vertical card on the left
pulse outputs on it.
Transit Time – Revision of the transit time card. The Transit time card is the
CommBoard ––Revision of the communications card.
Relays – Lists the number of pulse outputs present on the meter. This should
always be 2.
Analog Out – Lists the number of analog outputs present on the meter. This
should always be 1.
--Configuration-----
Serial# 12345
Utility 1.26.0.5
Transit Time 1.38.1
CommBoard 1.18.0
Relays 2
Analog Out 1
To Next Page
Loading...
Need help?
General
