OpenText Tableau Forensic TX1 Imager
The Information Company 107
2. From the Home screen, tap the Logical icon. The Logical Image job setup screen
will be displayed, as shown below.
The job
setup screen is organized in a natural workflow from top to bottom, but the
steps and settings can be accessed in any order. The default values display for each
step and setting. Tap the step number or heading to expand the section and view or
change the settings.
If only one source drive with one recognized filesystem and one formatted destination
drive are connected, they are automatically selected. If you are satisfied with the
default settings and the selected source and destination filesystems, press the Start
Logical Image button at the bottom of the screen to begin the job.
Note: Logical image job source auto-selection is distinct from duplication job source
auto-selection in that a logical image job operates at the filesystem level, not the
drive level. Therefore, a sole source drive will not be auto-selected for a logical image
job if it contains more than one recognized filesystem.
Copyright © 2022 Open Text. All rights reserved. Trademarks owned by Open Text.
To Next Page
Loading...