OpenText Tableau Forensic TX1 Imager
The Information Company 67
3. To modify or enter job notes, tap the 1 or Job Notes heading to expand the section.
Tap a text box to modify or enter Name, Case ID, or Notes values and the virtual
keyboard is displayed on the bottom half of the screen. If desired, you can also attach
a USB keyboard to one of the front Accessory USB ports to make data entry easier.
4. To change or add a s
ource drive, tap the 2 or Source heading. From the source list
modal that is displayed, select a drive from the list. A green check confirms your
selection. Close the modal by tapping the X in the upper right corner or by tapping
outside of the modal. Note that the source selection modal will automatically close
once a drive has been selected. If a different source is desired, simply go back into
the Select a Source screen by tapping on the 2 or Source heading from the
Duplication stepper.
Notes:
• To help users identify which source drives have already been acquired, a green
checkmark is shown in the bottom right portion of the drive tile for any drives that
have been used in a previous, successful duplication job (clone or image). For
currently active duplication jobs, a hollow checkmark will appear which will turn green
once the duplication job has successfully completed.
Copyright © 2022 Open Text. All rights reserved. Trademarks owned by Open Text.
To Next Page
Loading...