Panasonic AFPX-C30T - Page 207

7.7.4 Communication Tool Software Configurator WD (Ver1.10 or Later)
The communication tool software “Configurator WD” is required to set Ethernet communication for the
AFPX-COM5. Install the Configurator WD before setting the AFPX-COM5.
The Configurator WD can be downloaded from our website free of charge.
http://panasonic-denko.co.jp/ac/e/fasys/plc/plc/fp-x/software/index.jsp
(Member registration is required. Free of charge)
The setting is saved in the AFPX-COM5.
IP address setting
Item
Description
Default
Obtain IP
address
automatically
Note1)
When selecting “Obtain an IP address automatically”, an IP address is
obtained from the DHCP server. When selecting “Use the following IP
address”, an IP address is set manually.
Use the
following IP
address
Unit name
Unit name for Communication cassette AFPX-COM5 can be specified.
FPX_ET
IP address
IP address of Communication cassette AFPX-COM5
Set an IP address other than 0.0.0.0 and 255.255.255.255.
192.168.1.5
Subnet mask
Netmask of Communication cassette AFPX-COM5
255.255.255.0
Gateway
Gateway of Communication cassette AFPX-COM5
192.168.1.1
Note1) When an error occurs, the ERROR LED will be turned on.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com