Panasonic AJ-PX5000G - How to Restore Menu Setting Status to Factory Setting Values; Lens File

– 103 –
Chapter 4 Adjustments and Settings for Recording — Handling setting data
Writing setting data for scene les
1
Select [SAVE] in the main menu → [FILE] → [SCENE], and press the jog dial button (or <SET> button).
The list of scene les currently saved in camera memory is displayed.
2
Select the file to write from the list.
The title entry screen and keyboard are displayed.
3
Enter the desired characters with the keyboard.
4
Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press the jog dial button (or <SET> button).
The conrmation screen is displayed.
5
Select [YES], and press the jog dial button (or <SET> button).
The le is saved and the le list is updated.
Reading setting data for scene les
1
Select [LOAD] in the main menu → [FILE] → [SCENE], and press the jog dial button (or <SET> button).
The list of scene les currently saved in camera memory is displayed.
2
Select the file name to load, and press the jog dial button (or <SET> button).
The conrmation screen is displayed.
3
Select [YES], and press the jog dial button (or <SET> button).
Loading of the le begins.
4
When the completion message is displayed, press the jog dial button (or <SET> button).
Initializing (clearing) setting data for scene les
1
Select [CLEAR] in the main menu → [FILE] → [SCENE], and press the jog dial button (or <SET> button).
The list of scene les currently saved in camera memory is displayed.
2
Select the file name to delete, and press the jog dial button (or <SET> button).
The conrmation screen is displayed.
3
Select [YES], and press the jog dial button (or <SET> button).
Deletion (clearing) of the le begins.
How to restore menu setting status to factory setting values
The menu setting status on the camera can be returned to factory setting status.
1
Select [LOAD FACTORY DATA] in the main menu → [FILE] → [INITIALIZE], and press the jog dial button (or <SET> button).
The conrmation screen is displayed.
If [SYSTEM RESTART] is displayed on the conrmation screen, the camera will restart after reading out is complete.
2
Select [YES], and press the jog dial button (or <SET> button).
Reading out of data for the factory setting begins.
@@
NOTE
t Data scene les and lens les and data saved as user data is not deleted by performing this operation.
Lens le
Eight lens les are stored to internal memory on the camera.
Eight titles (total 64) of lens les can be written to SD memory cards with eight lens les saved as a single title.
The following data is recorded to lens les:
f Title name
f White shading compensation values