– 167 –
Chapter 7 Menu Operations — Menu list
Item Description of settings
[S.GAIN OFF] Selects a method to release super gain mode.
[L/M/H]: Released by changing the <GAIN> switch or <S.GAIN> switch (<USER> button).
[S.GAIN]: Released by the <S.GAIN> switch (<USER> button) only.
f Factory setting: [L/M/H]
[DS.GAIN OFF] Selects a method to release digital super gain mode (accumulated gain).
[L/M/H]: Released by changing the <GAIN> switch or <DS.GAIN> switch (<USER> button).
[DS.GAIN]: Released by the <DS.GAIN> switch (<USER> button) only.
f Factory setting: [DS.GAIN]
[D.ZOOM x2] Selects whether to enable 2x when digital zoom is assigned to the <USER> button of the camera.
[ON], [OFF]
f Factory setting: [ON]
[D.ZOOM x3] Selects whether to enable 3x when digital zoom is assigned to the <USER> button of the camera.
[ON], [OFF]
f Factory setting: [ON]
[D.ZOOM x4] Selects whether to enable 4x when digital zoom is assigned to the <USER> button of the camera.
[ON], [OFF]
f Factory setting: [ON]
[FBC(SHUTTER ON)] Selects whether to permit the operation of the ash band compensation (FBC) function when the
<SHUTTER> switch is set to <ON>.
[ENABLE]: Permits the operation of the ash band compensation function with the <USER> button.
[DISABLE]: Forbids the operation of the ash band compensation function with the <USER> button.
f Factory setting: [DISABLE]
[RC CHECK SW] Selects camera operation when the remote control unit (AJ-RC10G) <CHECK/5> button or the extension
control unit <REC CHK> button is pressed.
[REC CHECK]: Recording check function is enabled.
[PLAY]: Performs playback.
f Factory setting: [REC CHECK]
[WHITE BALANCE MODE]
Item Description of settings
[FILTER INH] Selects whether white balance memory (Ach or Bch) data is held or not held for each CC lter.
[ON]: Holds Ach and Bch memory data (2 memories), regardless of the CC lter.
[OFF]: Holds Ach and Bch memory data (8 memories), for each CC lter.
f Factory setting: [ON]
[SHOCKLESS AWB] When the position of the <WHITE BAL> switch is changed, set the time until when the white balance starts
at the changed position.
[FAST]: Approx. 1 second
[NORMAL]: Approx. 2 seconds
[SLOW1]: Approx. 3 seconds
[SLOW2]: Approx. 10 seconds
[SLOW3]: Approx. 20 seconds
[OFF]: Moves instantly.
f Factory setting: [NORMAL]
[AWB AREA] Switches the detection area that automatically adjusts white balance.
[25%]: Detects 25% of the area near screen center.
[50%]: Detects 50% of the area near screen center.
[90%]: Detects 90% of the screen area.
f Factory setting: [25%]
[AWB B] Sets the function assigned to the <WHITE BAL> switch <B>.
[MEM]: Records setting values when white balance is automatically adjusted, and operates using those
values each time the <WHITE BAL> switch is moved to <B>.
[ATW]: Assigns the auto tracking white balance function.
f Factory setting: [MEM]
[ATW SPEED] Switches the control speed of auto tracking white balance function.
[NORMAL], [SLOW], [FAST]
f Factory setting: [NORMAL]
[TEMP PRE SEL SW] Selects whether to set the preset color temperature to be variable or to switch between [3200K]/[5600K].
Right after the value is changed, the preset color temperature is set to [3200K] (when the lter <A> is set).
[VAR]: Switchable from [< 2300K] to [> 15000K].
[3.2K/5.6K]: Can be switched to [3200K] or [5600K].
f Factory setting: [VAR]
[COLOR TEMP
PRE]
Sets color temperature when the <WHITE BAL> switch is in the <PRST> position.
Sets the preset color temperatures selected in [TEMP PRE SEL SW].
When [VAR] is selected for [TEMP PRE SEL SW]:
[< 2300K]…[> 15000K]
f Factory setting: [3200K]
When [3.2K/5.6K] is selected for [TEMP PRE SEL SW]:
[3200K], [5600K]
f Factory setting: [3200K]
The range of color temperature that can be set differs depending on the position of the <CC FILTER> dial.
When a high color temperature is set, sometimes the value does not change even if the color temperature
is changed.
To Next Page
Loading...
