Panasonic AJ-PX5000G - Using Audio Devices

– 117 –
Chapter 5 Preparation — Preparing for audio input
Using audio devices
d
a b c
a: <AUDIO IN> switch
b: <AUDIO IN CH1/3> terminal
c: <AUDIO IN CH2/4> terminal
d: <LINE>/<MIC> selector switch
1
Connect the audio equipment to the <AUDIO IN CH1/3> or <AUDIO IN CH2/4> terminal of the camera with the XLR cable.
2
According to the channel to which the XLR cable is connected, switch the <AUDIO IN> switch to <REAR>.
3
Set the <LINE>/<MIC> selector switch on the rear panel to <LINE>.