– 146 –
Chapter 7 Menu Operations — Setting menu structure
Setting menu structure
Menu types and how to open them
Menu type Use How to open
[USER MENU]
In the main menu → [USER MENU SEL], you can select the desired items and
pages and register to [USER MENU]. You can select them depending on the
purpose or frequency of use to make a unique menu structure.
For details, refer to “Setting [USER MENU]” (page 148).
Displayed by pressing the <MENU>
button.
Main menu You can set all items in the setting menu.
The main menu has a structure of categorized layers according to intended use
and setting frequency.
Displayed by pressing and holding the
<MENU> button for three seconds or
more.
[OPTION MENU] Menu items are prepared to take into account additional functions in the future.
Please consult your vendor for more details.
Displayed by pressing the <MENU>
button while pressing and holding the
<LIGHT> button.
Main menu structure
[PAINT] These are items for performing ne image adjustments while monitoring the output waveform of the camera using the
waveform monitor. You will need support from video engineers to use congure these settings.
These menu item settings are enabled when using the camera as a standalone device.
These menu items can be set from an external remote controller.
These menu items cannot be set when the thumbnail screen is displayed.
[VF] These items are shown when selecting contents to show in the viewnder screen.
These menu items cannot be set when the thumbnail screen is displayed.
[CAMERA] These are items for changing the settings based on the condition of subject when the camera is operated.
These menu items cannot be set when the thumbnail screen is displayed.
[CLIP] These items are used when performing various tasks, such as playing back, deleting, and copying clips, and editing
metadata, while checking the thumbnail of the clips displayed in the LCD monitor.
These menu items are enabled when the thumbnail screen is displayed.
Clip operations such as [DELETE] or [COPY] are enabled when the target thumbnail is selected.
Some items are displayed only in specic situations such as in USB storage mode or on the explorer screen.
[REC/PB] These are various types of setting items when performing camera recording and playback.
[I/F SETUP] These are items for setting related to audio and video input/output and display, and setting battery, audio, video output,
etc.
[FILE] These are items for performing le-related operations such as reading from an SD memory card containing menu
settings data, and handling lens les and lens chromatic aberration correction (CAC) les.
These menu items cannot be set when the thumbnail screen is displayed or during playback.
[MAINTENANCE] These are items for performing maintenance inspection of the camera.
These menu items cannot be set when the thumbnail screen is displayed.
[SYSTEM] These items are used for checking and updating the camera’s rmware version.
Set the system frequency, the number of lines, and recording format.
[USER MENU SEL] This menu is used to set the items to be displayed in [USER MENU].
For details on items that can be set, refer to “Setting items to [USER MENU] and loading/reading the settings to a data
le” (page 192).
[OPTION MENU] structure
[OPTION]
[AREA SETTING]
To Next Page
Loading...
