Panasonic AJ-PX5000G - Lens File Adj

– 189 –
Chapter 7 Menu Operations — Menu list
Item Description of settings
[R H SAW] White shading correction is performed manually.
Adjusts sawtooth waveforms and parabolic wave forms of RGB channels in the horizontal and vertical
directions.
[−255]…[255]
f Factory setting: [0]
[R H PARA]
[R V SAW]
[R V PARA]
[G H SAW]
[G H PARA]
[G V SAW]
[G V PARA]
[B H SAW]
[B H PARA]
[B V SAW]
[B V PARA]
[LENS FILE ADJ.]
Item Description of settings
[LENS FILE ADJ. MODE] Selects the mode to perform lens adjustment.
[ON]: The Rch and Bch gain adjusted in the main menu → [PAINT] → [RB GAIN CONTROL], and the Rch,
Gch, and Bch are levels adjusted in [RGB BLACK CONTROL] are disabled.
[OFF]: The Rch and Bch gain adjusted in the main menu → [PAINT] → [RB GAIN CONTROL], and the
Rch, Gch, and Bch are levels adjusted in [RGB BLACK CONTROL] are enabled.
f Factory setting: [OFF]
[LENS R GAIN OFFSET] Corrects the Rch sensitivity of the lens to use.
[−200]…[200]
f Factory setting: [0]
[LENS B GAIN OFFSET] Corrects the Bch sensitivity of the lens to use.
[−200]…[200]
f Factory setting: [0]
[LENS R FLARE] Adjusts the Rch are level.
[0]…[100]
[LENS G FLARE] Adjusts the Gch are level.
[0]…[100]
[LENS B FLARE] Adjusts the Bch are level.
[0]…[100]
@@
NOTE
t Data adjusted in [LENS FILE ADJ.] can be saved as a lens le to the SD memory card.
[CAC ADJ.]
Item Description of settings
[CAC CONTROL] Turns chromatic aberration correction (CAC) [ON]/[OFF].
[ON]: Compensates for chromatic aberration.
[OFF]: Does not compensate for chromatic aberration.
f Factory setting: [ON]
[LIST/DELETE] Views the list of CAC FILE stored in the camera internal memory and deletes les of the numbers selected
from the list of CAC FILE.
[No1]…[No32]
f Factory setting: [No1]