Panasonic AJ-PX5000G - Waveform Monitor Function

– 95 –
Chapter 4 Adjustments and Settings for Recording — Viewnder status display
Waveform monitor function
A waveform of the video can be displayed by assigning the waveform monitor function to the <USER> buttons (<USER MAIN>/<USER1>/<USER2>)
and pressing the assigned buttons. Press the button again to return to the normal display.
f The waveform and vector displays can be switched by [WFM] (page 166) in the main menu → [CAMERA] → [SW MODE]. Whether to display the
waveform monitor on either or both of the viewnder and LCD monitor can be selected by [WFM DISP].
f The waveform is not displayed while the focus assist function [EXPAND] is active.
f The waveform display cannot be recorded.