Panasonic AJ-PX5000G - Page 135

– 135 –
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
Modifying recorded clip metadata
Fig. 1 Fig. 2
1
Display the metadata details window for the clip to be modified on the clip properties screen.
2
Place the cursor on the item to be modified using the cursor buttons. (Fig. 1)
The item of the metadata that can be modied is shown as [CREATOR], etc.
3
Press the <SET> button.
Information about keyboard operation is the same as “Checking and modifying uploaded metadata” (page 132).
f The input window (soft keyboard) for modifying metadata is displayed. (Fig. 2)
f Enter characters with the keyboard to modify the metadata.
4
Press the [OK] button on the keyboard.
The modied metadata is written on the clip and the screen returns to the metadata details window.
@@
NOTE
t To delete each item in [LOCATION] (shooting location data) of [SHOOT], the item cannot be deleted alone. By setting the [ALTITUDE] item to empty,
other [LONGITUDE] and [LATITUDE] items are collectively deleted.
t The metadata for a clip with the incomplete clip indicator
cannot be modied. For the clips recorded on multiple P2 cards, modify the metadata
while all P2 cards are inserted.
t Any [MEMO] with 101 characters or more cannot be modied.
P2 card status display
r P2 card status display settings
You can select the P2 card status display from either remaining capacity or used capacity of the P2 card.
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewnder screen.
2
Select either [REMAIN] (remaining capacity) or [USED] (used capacity) in the main menu → [CLIP] → [PROPERTY] → [REMAIN
SETUP].
r P2 card status display items
[REMAIN] Displays remaining capacity on the P2 card as the P2 card status display. (Factory setting)
[USED] Displays used memory capacity on the P2 card as the P2 card status display.