Panasonic AJ-PX5000G - Page 141

– 141 –
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
- Root
- Folders down to the 3rd level including the CONTENTS folder
t To copy to a [TYPE S] storage device, one or more partitions are required. You can either format the storage device to [FAT] or perform copying after
creating a partition through the export process.
t To cancel the copy process, use the cursor buttons to place the cursor on [CANCEL] and press the <SET> button. A [CANCEL] conrmation message
will appear. select [YES] and press the <SET> button. Clips copied halfway to the copy destination are deleted.
t If you have copied clips to a [TYPE S] storage device, you will not be able to import to that partition by card. Also, the part number display of the card
at that instance will display [UNKNOWN].
Storage device information display (explorer screen)
You can select the following in the explorer screen display.
f Storage device information display
f Storage device partition or folder thumbnail display selection
f Target partition or folder selection
To display the explorer screen, select [STORAGE] in the main menu → [CLIP] → [EXPLORE] and press the <SET> button.
2
3
4
1
1 Storage device indicator
This displays the connected / not connected status and the storage device type.
2 Display mode
This indicates that the explorer screen of the storage device is currently displayed.
3 Device information
For [TYPE S] and [P2STORE] (storage devices that allow reading/writing by card)
[PARTITION] [TYPE S]/[P2STORE]
[VENDOR] Vendor name
[MODEL] Model name
[SIZE] Total capacity (unit: GB)
[USED]
Used capacity (unit: GB)
Used P2 card area (unit: number of clips), maximum of 23
[FREE CAP.] Remaining capacity (unit: GB)
[SELECTED PART.] Number of partitions selected
For [FAT] and [OTHER] (other storage devices)
[PARTITION] [FAT]/[OTHER]
[VENDOR] Vendor name
[MODEL] Model name
[SIZE] Total capacity (unit: GB)
[FREE CAP.] Remaining capacity (unit: GB)
[SELECTED PART.] Number of folders selected
4 Partition or folder information
For [TYPE S] and [P2STORE] (partition information)
Displays a checkmark when a target partition is selected
[NO.] Partition number
[MODEL] P2 card model name
[PARTITION NAME] Name assigned to the partition
[DATE] Partition record date
[TIME] Partition record time
[SERIAL] P2 card serial number
For [FAT] and [OTHER] (folder information)
Displays a checkmark when a target partition is selected
[NO.] Folder number
[FOLDER NAME] Folder name (excluding the CONTENTS folder)