– 183 –
Chapter 7 Menu Operations — Menu list
Item Description of settings
[TYPE] Sets the connection method.
[DIRECT]: Accesses to the network function of the camera directly from a smartphone, tablet, or computer.
[INFRA]: Connects to the wireless access point.
f Factory setting: [DIRECT]
[SSID INPUT MODE] Sets the setting method of SSID. When [TYPE] in [WIRELESS PROPERTY] is set to [INFRA], this item
can be set.
[SELECT]: Selects from the access point list.
[MANUAL]: For entering the access point manually.
f Factory setting: [SELECT]
[SSID] Displays network name (SSID).
f Factory setting: [AJ-PX5000]
[BAND] Switches between two transmission methods (2.4 GHz or 5 GHz).
[2.4GHz], [5GHz]
f Factory setting: [2.4GHz]
[CHANNEL (2.4GHz)] Sets the channels to be used when [DIRECT] is selected in [TYPE], [2.4GHz] is selected in [BAND], and
the camera is connected via wireless LAN.
[AUTO], [CH1], [CH6], [CH11]
f Factory setting: [AUTO]
[CHANNEL (5GHz)] Sets the channels to be used when [DIRECT] is selected in [TYPE], [5GHz] is selected in [BAND], and the
camera is connected via wireless LAN.
[AUTO], [CH36], [CH40], [CH44], [CH48]
f Factory setting: [AUTO]
[ENCRYPTION] Sets the encryption format.
[WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]
f Factory setting: [WPA2-AES]
[ENCRYPT KEY] Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64
digits.
f Factory setting: [01234567890123456789abcdef]
[DHCP] Sets whether to use automatic acquisition via DHCP when [INFRA] is selected in [TYPE].
[ENABLE]: Uses automatic acquisition.
[DISABLE]: Does not use automatic acquisition.
f Factory setting: [ENABLE]
[IP ADDRESS] Sets the IP address when [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.1]
[SUBNET MASK] Sets the subnet mask when [DISABLE] is selected in [DHCP].
f Factory setting: [255.255.255.0]
[DEFAULT GATEWAY] Sets the default gateway when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.254]
[PRIMARY DNS] Sets the primary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP].
f Factory setting: [0.0.0.0]
[SECONDARY DNS] Sets the secondary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP].
f Factory setting: [0.0.0.0]
[DHCP SERVER] Sets whether to use the DHCP SERVER function when [DIRECT] is selected in [TYPE] and the camera is
connected via wireless LAN.
[ENABLE]: Uses the DHCP SERVER function.
[DISABLE]: Does not use the DHCP SERVER function.
f Factory setting: [ENABLE]
[4G/LTE PROPERTY] [APN] Sets the APN (Access Point Name) provided by the provider.
[USER ID] Sets the user name provided by the provider.
[PASSWORD] Sets the password provided by the provider.
[DIAL NO.] Sets the phone number provided by the provider.
[NETWORK TOOLS] [LOG DISPLAY] Displays the connection log.
[STATUS DISPLAY] Displays the network status.
[INITIALIZE] Restores the network settings to the factory settings.
[PING] Checks network connection using PING commands.
To Next Page
Loading...
