Panasonic AJ-PX5000G - Page 254

– 254 –
Chapter 11 Specication — Dimensions and specications
Headroom 18 dB/20 dB switchable menu
Proxy
Video compression format MPEG4 Simple Prole
H.264/AVC Baseline Prole
H.264/AVC High Prole
Audio compression format AAC-LC
Linear PCM
Approximate recording time (1 GB) AVC-G6 2CH MOV Approx. 13 min
STD 2CH MP4 Approx. 78 min
SHQ 2CH MOV Approx. 25 min
HQ 2CH MOV Approx. 78 min
HQ 4CH MOV Approx. 72 min
LOW 2CH MOV Approx. 135 min
These are reference values for continuous recording using the Panasonic products.
The recording time may differ depending on the scene or the number of clips.
Video input/output
<SDI IN> terminal
BNC×1
HD (3G/1.5G), SD: 0.8 V [p-p], 75 Ω
Switch the menu to use as <SDI IN> terminal/return video input terminal/<GENLOCK IN> terminal
<SDI OUT1> terminal
BNC×1
HD (3G/1.5G), SD: 0.8 V [p-p], 75 Ω
<SDI OUT2> terminal
BNC×1
HD (3G/1.5G), SD: 0.8 V [p-p], 75 Ω
<VIDEO OUT> terminal
BNC×1
Composite
1.0 V [p-p], 75 Ω
<HDMI OUT> terminal
HDMI×1 (HDMI type A terminal, not compatible with VIERA Link)
Audio input/output
<AUDIO IN> terminal
<CH1>/<CH2>
XLR×2, 3-pin
<LINE>/<MIC>/<MIC+48V> switchable type
<LINE>
4 dBu (−3/0/4 dBu selectable menu)
<MIC>
−60 dBu (−60/−50 dBu selectable menu)
<MIC+48V> Phantom +48 V supported, −60 dBu (−60/−50 dBu selectable menu)
<MIC IN> terminal
XLR×1, 5-pin
Phantom +48 V (selectable menu), −40 dBu (−50/−40 dBu selectable menu)
Wireless slot
25-pin, D-SUB, −40 dBu, 2ch supported
<AUDIO OUT> terminal
<CH1>/<CH2>
XLR×1, 5-pin
+4 dBu (−3/0/4 dBu selectable menu), equilibrium low impedance
<PHONES> terminal
Stereo mini jack×2
Speaker
20 mm diameter, round×1
Other input/output
<GENLOCK IN> terminal
BNC×1, 1.0 V [p-p], 75 Ω
<TC IN> terminal
BNC×1, 0.5 V [p-p] – 8 V [p-p], 10 kΩ
<TC OUT> terminal
BNC×1, 2.0±0.5 V [p-p], low impedance
<DC IN> terminal
XLR×1, 4-pin, DC 12 V (DC 11.0 V – 17.0 V)
<DC OUT> terminal 4-pin, DC 12 V (DC 11.0 V – 17.0 V), maximum output current 1.5 A
<REMOTE> terminal 10-pin
<LENS> terminal 12-pin
<VF> terminal 20-pin
<LAN> terminal 100BASE-TX/10BASE-T
<USB2.0> terminal (device) Type B connector, 4-pin
<USB3.0> terminal (host) Type A connector, 9-pin
<USB2.0> terminal (host) Type A connector, 4-pin
<LIGHT> terminal 2-pin, DC 12 V (DC 11.0 V – 17.0 V), maximum output current 4.5 A (up to 50 W equivalent)
LCD monitor 3.45 type LCD monitor, approx. 921000 dots (16:9)