104
Modem
When using the computer in a network environment, we recommend that you set
[System standby] and [System hibernates] to [Never], using the following procedure:
Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Power Schemes].
z To remove the cable, pull out while pressing down on the tab
With this function, if the telephone that is connected to the modem rings in the standby mode,
the power of the computer automatically switches ON.
This function is convenient when using automatic information-receiving applications such as
a FAX.
When using this function, it is necessary to run a software application that can receive
telephone calls and then return the computer to the original condition after a call.
Enabling the Ring Resume Function
A Click [start] - [Printers and Faxes].
B Click [Set up faxing] in the [Printer Tasks] area on the left.
z After [Configuring Components] screen is displayed, the fax icon will be
displayed
z This operation is not necessary next time
C Right-click on the fax icon and then click [Properties].
Ring Resume Function
To Next Page
Loading...
Need help?
General