121
Setup Utility
Parameters
(An underline indicates the factory default settings)
Touch Pad
z Select whether to use the touch pad ([Enable]) or not
([Disable])
Disable
Enable
Fn/Ctrl Key
z Select whether to switch the
Fn
functions with the
Ctrl
functions, and vice versa on the internal keyboard
z Do not attempt to replace the markings on the keys, or the
keys themselves
Normal
Replace
Display
z The display destination in cases where Windows is not
running is set here.
z If an external display is not connected, all information will
appear on the internal LCD even if [External Monitor] or
[Simultaneous] is selected.
After Windows starts up, the screen is displayed on the
display destination set in the following menu
[start] - [Control Panel] - [Other Control Panel Options] -
[Intel(R) Extreme Graphics] - [Devices]
External Monitor
Internal LCD
Simultaneous
Display Expansion
z Select whether to have the display expanded when not using
the native screen resolution
Disable
Enable
CD/DVD Drive Speed
z Select whether to set the DVD-ROM & CD-R/RW drive speed
to fast ([High]) or slow ([Low])
High
Low
To Next Page
Loading...
