46
Security Measures
3 Using either the Ï key or the Ð key, select [Set Supervisor
Password] and press the
Enter
key.
4 Only when the Supervisor Password has been set:
Enter your password at [Enter Current Password] and press the
Enter
key.
5
Enter your password at [Enter New Password] and press the
Enter
key.
z To disable the Supervisor Password
Press only the
Enter
key
6 Re-enter your password at [Confirm New Password] and press the
Enter
key.
z To disable the Supervisor Password
Press only the
Enter
key
7 At [Setup Notice], press the
Enter
key.
8 Press the
F10
key and select [Yes], then press the
Enter
key.
NOTE
z Disabling the Supervisor Password also disables the User Password
User Password is set when several people will be using this computer.
For example, the system administrator sets the Supervisor Password and the User
Password, and only advises the other users of the User Password. In this way, other users
can be restricted from changing the Setup Utility.
Setting the User Password (enabling, changing, disabling)
To Next Page
Loading...
Need help?
General