Panasonic CF-W2 Series

93
SD Memory Card Security Function
z [User name and password]
• You can change the Windows log-on user name and password which are
set in the SD memory card.
• When the set user name appears, enter the password and click [OK]. Then
enter the new user name and password
• [User name and password] can not be selected if the check mark is not
added to [Use when logging on to Windows]
3 Click [OK].
Operation differs, depending on the setting.
z If you add the check mark for [Use the SD card when starting the computer]:
Step C of [To use when starting the computer] in step
6 (Î page 87)
z If you remove the check mark for [Use the SD card when starting the computer]:
A Enter the password and click [OK].
B At the confirmation message [The SD card information registered in the Setup
Utility will be erased...], click [Yes].
z If you add the check mark for [Use when logging on to Windows]:
Step C of [To use when logging on to Windows] in step
6 (Î page 89)
z If you remove the check mark from [Use when logging on to Windows]:
A Enter the password and click [OK].
B At the confirmation message [The user name and password registered in the
SD card will be erased...], click [Yes].
4 Restart the computer.