87
SD Memory Card Security Function
5 Choose the key (SD memory card) setting method (A).
z [Leave set]
To leave the SD memory card in place instead of entering a password
(The card may be removed after the computer or Windows is started.)
z [Set and eject]
To set and eject the SD memory card instead of entering a password
The setting method is set separately for each computer. Different SD memory
cards may not use different setting methods on the same computer.
If you use a different method between starting the computer and logging on to
Windows:
In this screen, you can set the setting method for logging on to Windows. To set the
method when starting the computer, run the Setup Utility and change the setting of
[SD Setting Method] in the [Security] menu after completing the SD Card Setup.
(Î page 124)
6 Make the settings according to their intended.
z To use when starting the computer
An SD memory card will be registered with the computer (Up to two cards can be
registered)
To Next Page
Loading...
Need help?
General