95
External Display
C Click the display destination, and then click [Apply].
• When the screen is displayed to an external display: [Monitor]
• When the screen is displayed to the internal LCD: [Notebook]
• When the screen is displayed to a simultaneous display: [Intel(R) Dual
Display Clone]
• When Extended Desktop mode is set: [Extended Desktop] (Î page 96)
5 Set the number of colors, resolution, etc.
If simultaneous display or Extended Desktop is selected, click [Device Settings] to
make the settings.
NOTE
z The display destination after resuming from hibernation mode or after restarting may
differ from the display destination before entering hibernation mode or before
restarting
z Simultaneous display and display destination switching cannot be used while
[Command Prompt] is set to "Full Screen"
z When the external display is used alone, set the number of colors, resolution, or
refresh rate to suit the external display. These settings differ when the internal LCD is
used alone or with an external display simultaneously
z When the computer is set to display on both the internal LCD and the external display,
DVD-Video, MPEG files and other video files may not be played back smoothly.
Carefully read the operating instructions of the external display
To Next Page
Loading...
Need help?
General