Panasonic DP-3510

102
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2.2.17. Drive Unit
(1) Remove the Toner Waste Container.
(See Sect. 2.2.2.)
(2) Remove the Rear Upper Plate.
(See Sect. 2.2.4.2.)
(3) Remove the Rear Lower Plate and SC Cover
Bracket. (See Sect. 2.2.16.)
(4) Disconnect All Harnesses on the SC PC Board.
(See Sect. 2.2.16.)
(5) Loosen 5 Screws (21).
(6) Remove the SC Bracket (3306).
(7) Release the Harnesses from 2 Clamps.
(8) Loosen 2 Screws (21).
(9) Remove the SC Support Bracket (3305).
(10) Disconnect the Harness.