Panasonic DP-3510

357
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
8.25. Installing the Exit Tray (DA-XT600)
8.25.1. Contents
8.25.2. Installation
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Qty. Description Part No. Remarks
1 Exit Tray Assembly DZHP006490
1 Exit Roller E Assembly DZHP007040 For USA and Canada only
1 Exit Roller Gear 1 (Black) DZLF000639
For USA and Canada only
(DP-35xx)
1 Stop Plate DZJL000333
1 Stop Plate 2 DZJL000334
2Screw See Note
1 E-Ring See Note
For USA and Canada only
(DP-35xx)
1 Installation Instructions DZSM000558 This document
Note:
For USA and Canada, follow the steps below.
For Other Destinations, skip to the step (14).
(1) Open the Front Door.
(2) Open the Upper Exit Cover.
(3) Remove 3 Screws.
(4) Remove the Exit Guide 3 Assembly.
(5) Remove 2 Screws.
(6) Remove the Exit Guide 1 Assembly.
(2)
(4)
(3)
(5)
(6)
(5)