413
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
8.33. Installing the Key Counter Harness Kit (DZTY000128)
8.33.1. Contents
Note:
The Key Counter is sold separately.
8.33.2. Installation
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Qty. Description Part No. Remarks
1 Harness, KCTU DZFP001387
1 Cover, Connector DZMC000783
2
Screw (M4 x 10) See Note
1 Installation Instructions DZSM000609 This document
(1) Remove 9 Silver Screws.
(2) Remove the Upper Rear Cover.
(3) Open the Right Cover.
(4) Remove 3 Silver Screws.
(5) Remove the Right Rear Cover.
(6) Route the KCTU Harness through the hole in
the Frame as illustrated.
(7) Secure the KCTU Harness to the 2 Harness
Clamps.
(3)
(4)
(6)
(7)
To Next Page
Loading...
