65
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2.2.8. Drum Unit
(1) Open the Front Cover. (See Sect. 2.2.5.)
(2) Swing the Hopper Unit to the right side.
(See Sect. 2.2.5.)
(3) Pull the Developer Release Lever (3823) out
and turn it clockwise.
(4) Turn the Lifting Lever (2327) counter-clockwise.
(5) Loosen 1 Screw and remove the Drum Unit.
Note:
When handling the Drum Unit, hold by the Handle
as illustrated.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
Caution:
The OPC Drum is sensitive to light. To prevent
optical exposure problems, do not expose the
OPC Drum to direct sunlight or bright light (even if
it is a 1000-Lux fluorescent lamp).
<Removing the Old Separators>
(6) Turn the Drum Unit upside-down as illustrated.