Panasonic DP-3510

384
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
8.28. Installing the Punch Unit (DA-SP31)
8.28.1. Contents
Note:
1. The part number may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.28.2. Installation
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Qty. Description Part No. Remarks
1 Punch Unit See Note
1 Punch Lower Cover 4A1-8409-000
1 Punch Relay Harness FF3-4067-000
1 Upper Cover Guide 4A1-8408-000
1 Guide Plate (Long) 4B1-0949-000
1 Jam Removal Instructions Label FB5-5924-000
2 Shoulder Screw (Silver) See Note
2 Stepped Mounting Screw (Silver) See Note
1 Black Screw (M4 x 6) See Note
2 Silver Screw (M4 x 12) See Note
1 Installation Instructions DZSM000567 This document
Preparing the Host Machine for Installation
(1) Remove the bottom 3 Screws, and remove
Guide Plate (Short).
(1)
Guide Plate (Short)