Panasonic DP-3510

340
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
8.18. Installing the Expansion F-ROM Board (DA-EM600)
8.18.1. Contents
Note:
1. The part number may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.18.2. Installation
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Qty. Description Part No. Remarks
1 Expansion F-ROM Board DZEC102137
2 PC Board Support NH-7
1 Installation Instructions DZSM000756 This document
(1) Loosen 5 Screws.
(2) Remove the Rear Plate as illustrated.
(3) Install 2 PC Board Supporters for the Slot 1 on
the SC PC Board.
(4) Install the Program Expansion Board into Slot
1 (CN62) on the SC PC Board and secure with
the Supporters.
Note:
The Program Extension F-ROM Board must
always be installed into Slot 1 (CN62) for the PCL
or PCL/PS Printer Option to function.
(5) Proceed with the installation of other options.
If finished, close and secure the Rear Plate and
reinstall remaining Covers.
(6) Plug the AC Power Cord into the wall outlet and
turn the Main Power Switch on the Back and the
Power Switch on the Left Side of the machine to
the ON position.
(1)
(1)
(2)
Main
Power
SW
(3)
(3)
(4)