Panasonic DP-3510

323
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
8.14. Installing the Fax Communication Board (DA-FG600)
8.14.1. Contents
Note:
1. If also installing the Program Expansion Board (DA-EM600), it must be installed first.
2. The part number may differ depending on the Destination.
3. Refer to the Parts List in the Parts Manual.
8.14.2. Installation
Install the Hardware by following the steps below.
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Qty. Description Part No. Remarks
1 FXB PC Board See Note
1 MJR PC Board Assembly See Note
1 MJR Harness See Note
1 Speaker Assembly See Note
1 Speaker Harness 2 (Extension) See Note
1 SDRM Bracket See Note
1 Stamp Assembly See Note
1 Stamp Solenoid See Note
1 Telephone Line Cable See Note
1 Type Approval Label See Note
1 Line Label See Note
10 Screw (Short) See Note
1 Screw (Long) See Note
1 Operating Instructions (For Facsimile) See Note
1 Installation Instructions PJQRC0044Z This document
(1) Loosen 5 Screws.
(2) Remove the Rear Plate as illustrated.
(1)
(1)
(2)
Main
Power
SW