Panasonic DP-3510

62
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2.2.7. Developer Unit
(1) Open the Front Cover. (See Sect. 2.2.5.)
(2) Swing the Hopper Unit to the right side.
(See Sect. 2.2.5.)
(3) Remove 1 Screw (J9).
(4) Remove the Connector Cover (3930).
(5) Disconnect the Harness.
(6) Pull the Developer Release Lever (3823) out
and turn it clockwise.
(7) Remove the Developer Unit (1632).
(8) Remove the Developer Exchange Knob
(1405).
(9) Remove the old Splash Prevention Sheet
(1602).
Note:
When attaching the new Sheet, make sure that it is
aligned on the left side edge as illustrated.