63
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(10) Release 3 Latch Hooks and remove the Upper
Developer Cover (1601).
<Removing the old Developer and Toner>
(11) Install the Developer Exchange Knob (1405).
(12) Turn the Developer Unit upside down over a
suitable container and dump the used Developer
and Toner by rotating the Knob.
(13) Remove the Duct Cover (1620).
(14) Clean the Duct Cover (1620) with a soft cloth,
saturated with water.
To Next Page
Loading...
