715
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.3. DA-FS355, DA-SP41
11.3.1. General Description
11.3.1.1. Features
1. Through-type Stapler
Adoption of a through-type stapler allows a stapler to carry out saddle stitching.
2. Three Different Auto Stapling Positions
Three different stapling positions (Front 1-point stapling, Rear 1-point stapling, and Middle 2-point
stapling) are supported.
3. Saddle Stitching
A maximum of ten sheets of paper can be delivered stapled and folded in the middle.
4. Punch Mechanism (Option)
Installation of a Punch Unit enables punching holes in sheets before delivery (64 to 133 g/m
2
paper; no
transparencies).
To Next Page
Loading...
