Panasonic DP-3510

689
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.2.3.5. Disassembly and Assembly
1. Removal of the External Covers
(1) Remove the Finisher Tray (x2).
(2) Remove the Front Cover (2 Screws).
(3) Remove the Rear Cover (2 Screws).
(4) Remove the Top Cover (2 Shoulder Screws).
2. Removal of the Hole Punch Unit
(1) Remove the External Covers.
(2) Remove the Hole Punch Unit Harness (x2).
(3) Remove the Tension Spring.
(4) Remove the Tension Bracket (1 Screw, 1 E ring).
Note:
When the tension bracket is reinstalled, use the
left side screw hole for the 3 Hole Punch Unit and
the right side screw hole for the 4 Hole Punch Unit.
(5) Remove the Hole Punch Unit (2 Screws).
Upper Tray
Lower Tray
(5)