Panasonic DP-3510

690
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
3. Removal of the Hole Punch Unit Roller
(1) Remove the Hole Punch Unit.
(2) Remove the Hole Punch Unit Roller Assembly
(x4, 1 Screw each).
4. Removal of the CPU PCB
(1) Remove the External Covers.
(2) Disconnect all the Connectors.
(3) Remove the CPU PCB Mounting Screws
(4 Screws).
5. Removal of the Registration Roller Clutch
(1) Remove the Harness from the Harness Clamp
(9 positions).
(2) Remove the CPU PCB Mounting Bracket
(3 Screws).
(3) Remove the Registration Clutch Mounting Screw
(1 Set Screw).
(4) Remove the Registration Clutch Connector (x1).
(5) Remove the Registration Clutch.
(2)
(2)
(2)
(2)
(3)
(3)
(2)
(2)
(2)
(3)
(5)