Panasonic DP-3510

691
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
6. Removal of the Registration Roller
(1) Remove the Hole Punch Unit.
(2) Remove the Registration Roller Clutch.
(3) Remove the Registration Roller Bushing.
(Front/Rear, 1 E-Ring each)
(4) Remove the Registration Roller.
7. Removal of the Transfer Motor
(1) Remove the CPU PCB Mounting Bracket.
(2) Loosen the Tension Bracket Mounting Screw.
(3) Disconnect the Transfer Motor Connector.
(4) Remove the Transfer Motor Mounting Bracket
(3 Screws, 1 Connector).
(5) Remove the Transfer Motor Knob (1 Screw).
(6) Remove the Transfer Motor Belt.
(7) Remove the Transfer Motor from the Bracket
(3 Screws).
(2)
(6)
(5)