112
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2.2.18.2. Drive Motor, Lift Motor 2, CST PC Board
(1) Remove 2 Screws (H8).
(2) Remove the Rear Cover (9301).
(3) Disconnect the Harness on the System Console
Drive Motor.
(4) Remove 4 Screws (J4).
(5) Remove 1 Screw (21).
(6) Remove the Drive Motor (9410).
(7) Release the Harness from 2 Clamps.
(8) Disconnect the Harness on the CST PC Board
(CN602).
(9) Remove 4 Screws (J4).
(10) Remove the Timing Belt (9401) and the Motor
Bracket (9426) Assembly.