Panasonic DP-3510

130
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2. Press the "FUNCTION", "ORIGINAL SIZE (LEDGER/A3)" and "3" keys simultaneously in that order
to enter the Service Mode.
3. Enter the Copy Service Mode F5-87 (ADF) PM cycle and change to the desired value.
4. Press “FUNCTION” and “C (CLEAR)” keys simultaneously to exit the Service Mode.
3.5.4. U14 “Replace The Toner Waste Container”
A. Blinking Maintenance and Toner Waste Container Indicators
Upon detecting that the Toner Waste Container is full, the machine will complete the current job, and
stop operating.
A blinking Maintenance and Toner Waste Container Indicators will appear on the display.
To continue using the machine temporarily while waiting for the Service Technician, press
"FUNCTION" and "2" keys simultaneously (up to 5,000 copies max.).
B. Steady Maintenance and Toner Waste Container Indicators
Upon reaching the 5,000 copies, the machine stops and will not allow further operation until the
Toner Waste Container is replaced.
Replace the Toner Waste Container. Refer to Section 2.2.2.