Panasonic DP-3510

196
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
726 XMT
POP
LAN Received an error response from
the DNS Server.
Incorrect POP Server address is set.
Incorrect SMTP Server address is set.
727 XMT LAN Received an Error or No
Response from the Remote
Internet Fax. (SMTP Direct XMT)
Remote Internet Fax Errors: Busy or
Job Number Overflow for Relay XMT.
(Retry is possible)
728 XMT LAN Remote Internet Fax Errors: Memory
Overflow or No Power.
(Retry is not possible)
729 XMT LAN Failed to authenticate (SMTP
AUTHENTICATION) when
connecting with the SMTP server.
SMTP AUTHENTICATION, User Name
and/or Password are incorrect.
(Contact the Network Administrator.)
730 RCV LAN Unable to program the Internet
parameters or the autodialer via
Email from a PC.
Verify that the Fax Parameter #158 is
set to Valid.
731 RCV LAN Dialer full while Relayed
Transmission Request was
received.
Dial buffer for manual number dialing
(70 stations) are being used.
741 XMT, Polling PSTN Unable to dial Deleted the registered station name
before dialing with Timer Controlled
Communications, etc.
800 Relay
Comm.
PSTN The machine was requested to
relay a document but has no Relay
Hub capability.
814 Conf. XMT
Conf. Polling
Relay
Comm.
PSTN The remote station does not have
Relay XMT nor Confidential
Communication capability.
815 Conf. RCV PSTN Mailbox is full.
816 Conf. Polled PSTN The received Polling Password did
not match.
825 Conf. RCV
Conf. Polled
PSTN Parameter settings of the remote
station are not properly set.
870 MEM XMT
Multi-Copy
PSTN
LAN
If applicable sub-address is not
registered in the phone book of the
receiver side when using sub-
addressing function.
Receiver side does not have correct
sub-address in their phone book.
741 XMT, Polling PSTN Memory overflow occurred while
storing documents into memory.
879 Memory
RCV
PSTN Memory overflow occurred during
substitute memory reception.
Memory overflow on the Fax side.
LAN Memory overflow.
Mail Server sent a reset command
while downloading the data to the
machine.
Memory overflow on the Fax side.
Mail server aborted the download (Busy
with other higher priority jobs).
880 - - File Access Error.
884 - - File Access Error.
961 RCV LAN Memory file access error. SC PCB is defective.
962 XMT PSTN Memory file access error. SC PCB is defective.
LAN Memory file access error. SC PCB is defective.
Fax Information Codes
Code Mode Phase Description of Problem Cause