Panasonic DP-3510

239
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
005 DESTINATION
CODE
000 : Austria
001 : U.K.
002 : Canada
003 : Denmark
004 : Taiwan
005 : Finland
006 : Germany
007 : Netherlands
008 : Italy
009 : Spanish
010 : Hong Kong
011 : Australia
012 : Switzerland
013 : Norway
015 : Portuguese
016 : Ireland
017 : Belgium
018 : Sweden
019 : Turkey
020 : U.S.A.
021 : France
022 : New Zealand
025 : Japan
030 : Czech
031 : Russia
032 : Greece
033 : Hungary
034 : Indonesia
035 : South Korea
038 : Malaysia
039 : China
045 : Thailand
048 : South Africa
049 : Singapore
050 : Universal
Sets the Destination Code after installing the Fax
Communication Board (DA-FG600).
Note:
It is not necessary to set the parameter for the
following suffix (Destinations). The Fax Firmware
is automatically loaded with the Host Firmware.
PB : UK
PF : France
PG : Switzerland
PK : China
PM : Germany
PT : Taiwan
PU : USA
PEU : UK
006 ID DISPLAY 1 = Number (Numeric ID)
2 = Chara (Character ID)
Selects the priority of displaying the ID.
007 JRNL COLUMN 1 = Station
2 = RCV’D ID
Selects the contents of the ID to display on the
Journal.
008 MONITOR 1 = Off
2 = On
Selects whether the Monitor is ON/OFF for
monitoring fax signals.
(FOR SERVICE USE ONLY)
009 DC LOOP 1 = Off (Normal)
2 = On (Off Hook)
Selects a false Off Hook state for back to back
communication test.
010 TX LEVEL 00 = 0 dBm
~
15 = -15 dBm
Selects the TX signal output level, 0 to -15 dBm in 1
dBm steps. (Refer to Chapter 4.3.)
011 RX LEVEL 1 = -43 dBm
2 = -38 dBm
3 = -33 dBm
4 = -48 dBm
Selects the receiving sensitivity of -33/-38/-43/-48
dBm.
Function Parameter Table
No. Parameter Selections Function