Panasonic DP-3510

302
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
4) Upgrading the Main Unit's Firmware Code
Start the Local Firmware Update Tool and select the following Firmware Code Parent File Folder in
the C:\Panasonic\Panasonic-FUP\Data folder, and select the Firmware Code Type then follow the
display instructions to upgrade the Main Unit's Firmware Codes.
You must process each firmware file separately in this manner and sequence.
Note:
1. Every time the machine finishes receiving a firmware code file, the unit does the delete, rewrite of
the firmware code and then boot. Set the unit back to Parallel Firmware Update in Service Mode
after boot up, to continue the firmware update.
2.While updating the firmware code, the display may become garbled, however, it will return to
normal upon completion of the firmware update.
3. Please refer to the service manual for additional details.
4. The suffix "_xx" for the Folder Name or File Name may not exist depending on the destination
location.
Parent Firmware File Folder Sub Firmware File Folder Firmware File
Transferring
Order
\ DP-3510_4510_6010_xx_xxxxxx \ PNL \ SFDM_PNLAxVxxxxxx-xx SFDM_PNLAxVxxxxxx-xx.bin 1
\ SC_STD \ DP-SFDMAxVxxxxx-xx DP-SFDMAxVxxxxx-xx.bin 2
\ SC_PCL \ DP-SFDMBxVxxxxx-xx DP-SFDMBxVxxxxx_xx.bin
DP-SFDMCxVxxxxxa_xx.bin
DP-SFDMCxVxxxxxb.bin
2-1
2-2
2-3
\ SC_PS \ DP-SFDMDxVxxxxx-xx DP-SFDMDxVxxxxx_xx.bin
DP-SFDMExVxxxxxa_xx.bin
DP-SFDMExVxxxxxb.bin
2-1
2-2
2-3
\ SPC \ SFDM_SPCAxVxxxxxx SFDM_SPCAxVxxxxxx.bin 3
When you select the Parent Folder, the following Firmware Type
window appears. Proper Firmware Files are selected automatically by
selecting the Firmware Type.
The transferring order is set up automatically.