326
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
<If you already installed HDD Unit Option, follow
the step below, otherwise, skip to Step (24)>
(23) Secure the Harness to the 1 Harness Clamp.
(24) Plug the G3 Fax PC Board (FXB) into the SC
PC Board with on Board Connector.
(25) Secure the G3 Fax PC Board with 3 Screws
(Short).
(26) Connect the Harness to 3 Connectors on the
FXB PC Board (CN391, CN392 and CN393).
(27) Proceed with the installation of other options.
If finished, close and secure the Rear Plate and
reinstall remaining Covers.
(28) Open the ADF Cover.
(29) Lift the Lower Opening and Shutting guide 2
Assembly.
(30) Lift the Original Tray Assembly.
(31) Lower the Inverting Guide 4 Assembly.
(32) Remove 2 Screws.
(33) Remove the Inverting Guide 3 Assembly.
(23)
(25)
(24)
(26)
(28)
(29)
(30)
(31)
(32) (33)
To Next Page
Loading...
