Panasonic DP-3510

348
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
8.22.3. Side-to-Side Adjustment of the LSU Image
1. Press the "FUNCTION”, “ORIGINAL SIZE (LEDGER/A3)" and “3” keys simultaneously in that order to
enter the Service Mode.
2. Press the “6” key to enter the F6 Mode.
3. Press the “START” key.
4. Press the “1”, “3” and "START" keys sequentially to enter the F6 Mode code “13” for the Side-to-Side
adjustment of the 3rd Tray (-8 to 7).
5. Press the “1”, “4” and "START" keys sequentially to enter the F6 Mode code “14” for the Side-to-Side
adjustment of the 4th Tray (-8 to 7).
6. Press the “STOP” key.
7. Press the “FUNCTION” and “C” (CLEAR) keys simultaneously to exit the Service Mode.
8. Make a copy to verify your adjustment, repeat the steps above if further adjustment is required.
Note:
The Gear Combination Shown on the Left is for
DP-3510 / 3520 / 4510 / 4520 as default setting.
Note:
After the machine is installed, be sure to lock the 2
Casters in front. If necessary, adjust the Leveler
behind the right front caster for more stability.
(8) Connect the System Console Cable to the
Machine.
Note:
Refer to the 3000-Sheet Tray Installation
Instructions if it is installed.
(9) Plug the AC Power Cord into the wall outlet and
turn the Main Power Switch on the Back and the
Power Switch on the Left Side of the machine to
the ON position.
DP-3510 / 3520 / 4510 / 4520: 3 Ribs outside
(Plastic Washers)
(8)