406
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(2) Place the Punch Unit on the paper supply
section of the Finisher as shown below.
(3) Secure the Punch Unit to the Finisher with the 2
Original Screws (White, M4 X 6) and 1 Enclosed
Screw (Screw with Threaded Washer Held, M4 x
6).
Latch
Positioning Pin
Punch Base Cover
Screw
Screw
Screw with Threaded
Star Washer
To Next Page
Loading...
