46
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(24) Remove 1 Screw (J2).
(25) Loosen 3 Screws (H8).
(26) Lift up the Original Tray Assembly.
(27) Remove the ADF Rear Cover (627).
(28) Remove 1 Screw (21).
(29) Remove the Front ADF Cover Bracket (529).
(30) Release the ADF Cover Arm (624).
(31) Remove the ADF Cover (502) Assembly.
Note:
When reinstalling the ADF Cover Assembly, make
sure that the Vibration Guide Sheet 1 and 2 are
reinstalled properly as illustrated.
To Next Page
Loading...
