476
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.1.1.2. DA-600, DA-FS605 and DA-SP31 Specifications
1. Finisher Unit
Notes:
*1: Sizes are approximate when using blank 21 lb (80 g/m
2
) paper.
*2: Misalignment may occur if more than 750 of small-size sheets are stacked.
*3: The accuracy of the stack height is ± 7 mm.
*4: Matching is not guaranteed.
Item Description
Stacking Method Trays 1 and 2: by lifting tray
Stacking
Orientation
Face-down
Face-up
Stacking Size
A3, A4, A4-R, A5-R, B4, B5, B5-R
LDR, LGL, LTR, LTR-R, INV-R, FLS
Paper Weight 17 - 35.5 lb (64 - 133 g/m2)
Bins Trays 1 and 2
Modes Non-Sort : Trays 1 and 2
Sort : Trays 1 and 2
Staple : Trays 1 and 2
Stacking
Capacity
Non staple sort
Small-size*
1
Tray 1 and 2: 57.8 in (147 mm) high (1000 sheets)*
2
Large-size*
1
Tray 1 and 2: 2.91 in (74 mm) high (500 sheets)
Staple sort
Small-size*
1
Tray 1 and 2: 4.33 in (110 mm) high/30 sets
(750 sheets)*
2
Large-size*
1
Tray 1 and 2: 2.91 in (74 mm) high/30 sets
(500 sheets)
Size Mixing
Size mixing : 1.73 in (44 mm) or less (300 sheets)*
4
Stapling : 0.86 in (22 mm) or less (150 sheets/30 sets)*
4
Stacking Mixing Face-down / Face-up
Item Description
Stapling By rotating cam
Stapling Position See Fig. 1-001.
Stapling
Capacity
Small-size 50 sheets Equivalent of 21 lb (80 g/m2) paper Including two
sheets of thick stock (covers).
Large-size 30 sheets
Staple Supply Special staple cartridge (5000 staples)
Replacement
Staples
FQ-SS66 : For DA-FS605 (Saddle Stitch)
FQ-SS50 : For DA-FS600 / 605
Staple Detection Provided
Manual Stapling Not available
Stapling Size 1-point diagonal
stapling
Front A3, B4, A4, A4-R, LDR, LGL, LTR, LTR-R
Rear A3, B4, A4, LDR, LTR, B5
1-point Rear A4-R, LTR-R, LGL
2-point A3, B4, A4, LDR, LTR, B5
Paper Detection Provided
Control Panel Not available
Display Not available