537
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
7. When the 3rd sheet arrives and its leading edge reaches the Inlet Sensor (PI1), the Buffer Roller starts
to operate once again.
Fig. 2-062
8. When the Buffer Roller starts to operate, the Buffer Outlet Solenoid (SL3) turns off so that the path is
directed in the direction of delivery. (The actual switch-over will occur after the trail edge of the first
sheet has moved past the flapper.)
Fig. 2-063
9. The Buffer Roller continues to rotate, and all the sheets are fed together towards the Delivery Roller.
Fig. 2-064
Inlet Sensor (PI1)
3rd Sheet
1st
Sheet
2nd Sheet
Inlet Sensor (PI1)
SL3
1st Sheet
Buffer Outlet
Solenoid
OFF
3rd Sheet
To Next Page
Loading...
