Panasonic DP-3510

541
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
6. Delivery Sensor Stationary Jam (24H)
The sheet does not move past the Delivery Sensor when an equivalent of twice the feeding length of
the sheet has been fed after the Delivery Sensor turned on.
Fig. 2-072
7. Stapling Tray Sensor Stationary Jam (25H)
The sheet does not move past the Stapling Tray Sensor 1 sec after the Delivery Motor (M2) turned on.
Fig. 2-073
8. Timing Jam (05H)
The Inlet Sensor (PI1) detects a sheet before the delivery signal is received from the Copier.
9. Staple Jam (05H)
When the Staple Motor (M6) is rotating clockwise, the Staple Home Position Sensor (PI22) does not
turn on within 0.5 sec. after it has turned off. However, the sensor turns on within 0.5 sec. after the
motor has been rotated counter-clockwise.
10. Power-On Jam (07H)
The Inlet Sensor (PI1), Delivery Sensor (PI3), Buffer Path Paper Sensor (PI4) and/or Buffer Path Inlet
Paper Sensor (PI17) detects paper at power-on.
11. Door Open Jam (08H)
The Joint Sensor (PI15), Door Open Sensor (PI16) or Door Switch (MS1) detects the cover open
during operation (including the Upper Door Switch (MS1P) and Front Door Switch (MS2P) when the
optional punch unit is mounted).
12. Punch Jam (0AH)
The Punch Home Sensor (PI3P) does not turn on again within 200 misc. after turning off.
Jam check
Delivery Sensor (PI3)
Second Feed Motor
(M8)
Delivery Motor (M2)
Jam check
Delivery Sensor (PI3)
Second Feed Motor
(M8)
Delivery Motor (M2)
Equivalent of size x2
Normal
Equivalent of size x2
Jam
Jam check
Stapling Tray
Sensor (PI4)
Delivery Motor (M2)
Jam check
Stapling Tray
Sensor (PI4)
Delivery Motor (M2)
1 sec
Normal
1 sec
Jam